通用banner
current location : Home > news > Company news

Contact UsContact Us

Dalian Yamei Handicraft Co., Ltd

Landline:8670-8008

phone:139-4083-3288

Mailbox:xue@dl-yamei.com

website:   www.yamei-tiffany.com

Address:Ying Cheng Zi Zhen Nan Gou Cun, Ganjingzi District, Dalian City, Liaoning Province

How to install old glass lampshade

2022-05-11 11:13:13

The installation of the old-fashioned embedded lampshade is to use the iron protective concave convex cover as the lampshade. There is a lamp port in the middle, which can be installed directly. The replacement and installation method of the rear bar lampshade is to first open the trunk cover and remove the trunk lining cotton. After the back-up cover is opened, the lining cotton on one side of the removed tail lamp needs to be disassembled. It will be found that the lining cotton is fixed by several plastic clips, the nut for fixing the rear tail lamp, the harness for the rear tail lamp and the lamp cover of the rear tail lamp. After disassembly, the rear tail lamp can be removed and replaced with a new automobile tail lamp cover. Just install it back according to the reverse steps.

1.png

Now nail gun nails or glass partition nails on the inner side of a long side, and then push the glass up. One person drags the glass, and the other person nails nails or self tapping screws on the other side. Don't all go into the wood, as long as you can drag the jade sand glass. After that, apply glass transparent glue around the glass and at the groove joints. After two more days, the glass glue dries and the nails can be removed. If it is a ceiling lamp, One is to directly align the shell with the lamp panel and twist the shell clockwise. The other is to have a handle on the lamp panel. Install the shell and pull the handle to install the lampshade.

Unpack and remove the lampshade. The lamps I bought include Rex's and OPP's. one is the rotary lampshade, and the other is the slot type. When it is broken, it can be drilled on the ceiling with an impact drill. Fill the hole with a piece of wood; Fix the chassis of the ceiling lamp in position with screws; After the chassis is fixed, connect the wire with the wire of the chassis, then connect the wire with insulating tape, and then install the lamp and lampshade. Turn off the power. Turn off the lighting source and keep the socket power. Before installation, be sure to use the electric pen to test to ensure that the lighting source really runs out of power before construction.

If the supporting light belt uses a switch, pay attention to the direction of the line when threading. Household chandelier installation method and step 5. The next step is the installation of lampshade and lamp arm. Assemble the lampshade with a screwdriver and other tools. After installation, power on and try it. Adjust it slightly according to the actual situation.


标签

上一篇:New glass2021-05-25 13:33:24
下一篇:没有了

Z近浏览:

相关产品

相关新闻

share:未标题-21.png未标题-23.png未标题-24.png

Copyright © Dalian Yamei Handicraft Co., Ltd